Enlargements (Dilations)
From the Transformation of the plane curriculum
TL;DR
Enlargements change the size of a shape while keeping its proportions and orientation the same, all relative to a fixed center point. You use a scale factor to determine how much larger or smaller the shape becomes, and a center of enlargement to fix where the transformation originates. This transformation essentially "stretches" or "shrinks" a shape from a central point.
1. The Mental Model
Imagine shining a flashlight through a small cutout shape onto a wall. The image on the wall is an enlargement (or reduction) of the cutout. The flashlight's bulb is your "center of enlargement," and how far the cutout is from the wall determines the "scale factor."
2. The Core Material
Enlargements are transformations that change the size of an object. To perform an enlargement, you need two key pieces of information:
- The Center of Enlargement: This is a fixed point from which all points of the object are enlarged. It's the "pivot" or "origin" for the scaling.
- The Scale Factor (k): This number tells you how much bigger or smaller the object gets.
- If k > 1, the object gets larger.
- If 0 < k < 1, the object gets smaller (a reduction).
- If k = 1, the object stays the same size.
- If k < 0, the object is enlarged and inverted (it flips through the center of enlargement).
How Enlargements Work
Every point on the original object (let's call it P) is moved to a new point (P') such that:
- P' lies on the straight line that passes through the Center of Enlargement (C) and P.
- The distance from C to P' is
ktimes the distance from C to P.
In coordinate geometry, if the center of enlargement is the origin (0,0) and the scale factor is k, then a point (x, y) becomes (kx, ky).
If the center of enlargement is (a, b), the process is a bit more involved:
1. Translate the object so the center of enlargement moves to the origin: (x - a, y - b).
2. Apply the scale factor: (k(x - a), k(y - b)).
3. Translate back: (k(x - a) + a, k(y - b) + b).
Understanding the Scale Factor

Photo by Caroline Cagnin on Pexels
A positive scale factor means the enlarged shape is on the same side of the center of enlargement as the original. A negative scale factor means it's on the opposite side and inverted.
graph TD
A["Original Object (e.g., Triangle ABC)"] --> B{"Choose Center of Enlargement (C)"}
B --> C1{"Choose Scale Factor (k)"}
C1 --> D{"For each vertex P of the object:"}
D --> E["Draw a line from C through P"]
E --> F["Measure distance CP"]
F --> G["Calculate CP' = k * CP"]
G --> H["Locate P' on the line from C through P (at distance CP')"]
H --> I{"Repeat for all vertices"}
I --> J["Connect the new vertices (A'B'C')"]
J --> K["Enlarged Object (A'B'C')"]
3. Worked Example
Let's enlarge a triangle with vertices A(1,1), B(3,1), C(1,4) using a center of enlargement at the origin O(0,0) and a scale factor of k = 2.
-
Vertex A(1,1):
- Multiply coordinates by k: (2 * 1, 2 * 1) = A'(2,2)
-
Vertex B(3,1):
- Multiply coordinates by k: (2 * 3, 2 * 1) = B'(6,2)
-
Vertex C(1,4):
- Multiply coordinates by k: (2 * 1, 2 * 4) = C'(2,8)
The new triangle A'B'C' has vertices at (2,2), (6,2), and (2,8). It's twice as large as the original triangle and is in the same orientation.
Now, let's try with a center of enlargement that's not the origin.
Enlarge triangle A(1,1), B(3,1), C(1,4) with center (2,2) and scale factor k = 2.
-
Vertex A(1,1):
- Translate A by (-2,-2) to make the center the origin: (1-2, 1-2) = (-1,-1)
- Apply scale factor: (2 * -1, 2 * -1) = (-2,-2)
- Translate back by (2,2): (-2+2, -2+2) = A'(0,0)
-
Vertex B(3,1):
- Translate B by (-2,-2): (3-2, 1-2) = (1,-1)
- Apply scale factor: (2 * 1, 2 * -1) = (2,-2)
- Translate back by (2,2): (2+2, -2+2) = B'(4,0)
-
Vertex C(1,4):
- Translate C by (-2,-2): (1-2, 4-2) = (-1,2)
- Apply scale factor: (2 * -1, 2 * 2) = (-2,4)
- Translate back by (2,2): (-2+2, 4+2) = C'(0,6)
The new triangle A'B'C' has vertices at (0,0), (4,0), and (0,6).
4. Key Takeaways
- Enlargements change a shape's size while preserving its shape and orientation (unless k < 0).
- You always need a center of enlargement and a scale factor to perform this transformation.
- A positive scale factor keeps the image on the same side of the center; a negative one flips it.
- A scale factor greater than 1 makes the object larger, between 0 and 1 makes it smaller.
- When the center of enlargement is the origin, you simply multiply each coordinate by the scale factor.
- For a center of enlargement not at the origin, you translate, scale, then translate back.
Common Mistakes to Avoid:
- Forgetting to specify or correctly identify the center of enlargement.
- Incorrectly applying the scale factor to distances, or to coordinates when the center isn't the origin.
- Confusing a reduction (k < 1) with an enlargement (k > 1).
- Drawing the image on the wrong side of the center when using a negative scale factor.
5. Now Try It
Draw a square with vertices at (2,2), (4,2), (4,4), and (2,4) on a coordinate grid. Now, enlarge this square using a center of enlargement at (0,0) and a scale factor of k = 0.5. After that, take the original square and enlarge it using the center of enlargement (1,1) and a scale factor of k = -2. What do you notice about the final positions and orientations of the two enlarged squares?
Success looks like: You should have two new squares drawn on your grid. The first one should be a smaller square, closer to the origin. The second one should be a larger, inverted square, on the opposite side of (1,1) from the original.
Frequently asked about Enlargements (Dilations)
More from Transformation of the plane
Get the full Transformation of the plane curriculum
Clone the complete plan to your dashboard for unlimited AI-generated notes, practice quizzes, and a personalised revision schedule.
Save this course free