Rotations

SA
StudyAI
AI-generated study notes
· Published Updated Free model

From the Transformation of the plane curriculum

TL;DR

Rotations spin a shape around a fixed point, called the center of rotation, by a specific angle. The shape's size and form don't change, only its position and orientation. You can describe any rotation using its center and the angle of turn.

1. The Mental Model

Imagine pinning a drawing to a board with a thumbtack, then spinning the drawing around the thumbtack without lifting it. The thumbtack is your center of rotation, and how much you spin it is the angle.

2. The Core Material

A rotation is a transformation that turns every point of a figure about a fixed point, called the center of rotation, by a given angle of rotation.

Key Properties of Rotations:

Close-up of keys in hand representing property ownership with blurred financial documents in the background.
Photo by Jakub Zerdzicki on Pexels

  • Isometry: A rotation is an isometry, meaning it preserves distance and shape. The original figure (pre-image) and the rotated figure (image) are congruent.
  • Orientation: Unlike reflections, rotations preserve the orientation of the figure. If you read the vertices of a triangle clockwise before rotation, you'll still read them clockwise after.
  • Center of Rotation: This is the only point that doesn't move during a rotation. All other points move along circular paths around this center.
  • Angle of Rotation: This is the amount of turn, usually measured in degrees.
    • Positive angle: Indicates a counter-clockwise rotation.
    • Negative angle: Indicates a clockwise rotation.

How to Perform a Rotation:

Whirling dervishes performing in a traditional Sufi ceremony.
Photo by Yasir Acar on Pexels

Let's say you want to rotate a point P around a center C by an angle $\theta$.

  1. Draw a line segment: Connect the point P to the center of rotation C (PC).
  2. Measure the angle: From the line segment PC, measure the angle $\theta$ in the specified direction (counter-clockwise for positive, clockwise for negative).
  3. Draw the new segment: Draw a new line segment from C, equal in length to PC, at the measured angle. The endpoint of this new segment is P', your rotated point.

You repeat this process for all key points of your shape (e.g., vertices of a polygon) to get the rotated image.

Here's a flowchart to visualize the steps:

graph TD
    A["Identify Point P and Center C"] --> B["Draw Line Segment PC"]
    B --> C["Determine Rotation Angle \u03B8 (e.g., 90\u00B0 CCW)"]
    C --> D["Place Protractor at C, Align with PC"]
    D --> E["Measure \u03B8 in Correct Direction"]
    E --> F["Draw New Line Segment CP' (same length as CP)"]
    F --> G["P' is the Rotated Point"]

Common Rotation Angles and Their Effects (around the origin (0,0)):

A Common Myna bird perched on a rustic wooden barrel in natural light.
Photo by Dr Photographer on Pexels

  • 90° Counter-Clockwise (CCW): If you have a point (x, y), its rotated image will be (-y, x).
    • Think: Swap x and y, then make the new x-coordinate negative.
  • 180° Rotation (CCW or CW): If you have a point (x, y), its rotated image will be (-x, -y).
    • Think: Just change the sign of both coordinates.
  • 270° Counter-Clockwise (CCW) / 90° Clockwise (CW): If you have a point (x, y), its rotated image will be (y, -x).
    • Think: Swap x and y, then make the new y-coordinate negative.

Rotation Around an Arbitrary Point (a,b):

If the center of rotation isn't the origin, you can use a three-step process:

  1. Translate: Shift the entire figure so the center of rotation moves to the origin. If the center is (a, b), you'd translate every point (x, y) to (x-a, y-b).
  2. Rotate: Perform the rotation around the origin using the rules above on the translated points.
  3. Translate Back: Shift the figure back by reversing the first translation. If you subtracted (a, b) before, you now add (a, b) back to every point. So, a point (x', y') from the rotation becomes (x'+a, y'+b).

3. Worked Example

Let's rotate triangle ABC with vertices A(1, 1), B(3, 1), and C(1, 4) 90° counter-clockwise around the point (2, 2).

  1. Translate the center to the origin:
    Our center is (a,b) = (2,2). So we subtract 2 from each x-coordinate and 2 from each y-coordinate.

    • A'(1-2, 1-2) = A'(-1, -1)
    • B'(3-2, 1-2) = B'(1, -1)
    • C'(1-2, 4-2) = C'(-1, 2)
  2. Rotate 90° CCW around the origin:
    Use the rule (x, y) → (-y, x).

    • A''(-(-1), -1) = A''(1, -1)
    • B''(-(-1), 1) = B''(1, 1)
    • C''(-(2), -1) = C''(-2, -1)
  3. Translate back:
    Add 2 to each x-coordinate and 2 to each y-coordinate.

    • A'''(1+2, -1+2) = A'''(3, 1)
    • B'''(1+2, 1+2) = B'''(3, 3)
    • C'''(-2+2, -1+2) = C'''(0, 1)

So, the rotated triangle has vertices A'''(3, 1), B'''(3, 3), and C'''(0, 1).

4. Key Takeaways

  • Rotations spin a figure around a fixed point (center of rotation) by a specific angle.
  • Rotations preserve the size and shape of the figure, making the pre-image and image congruent.
  • The center of rotation is the only point that doesn't move.
  • Positive angles mean counter-clockwise rotation; negative angles mean clockwise rotation.
  • When rotating around a point other than the origin, you can translate the figure so the center of rotation is at the origin, rotate, and then translate back.

Common Mistakes to Avoid:

  • Mixing up clockwise and counter-clockwise: Always double-check the direction of the angle.
  • Incorrectly applying the (x, y) rules: For example, remember 90° CCW is (-y, x), not (y, -x).
  • Forgetting to translate back: If you move the center to the origin, you must move it back at the end.
  • Not using the correct center: Ensure you're rotating around the specified center point, not just the origin by default.

5. Now Try It

Rotate the square with vertices P(0, 0), Q(2, 0), R(2, 2), and S(0, 2) 180° counter-clockwise around the point (1, 1). Plot the original and rotated square on graph paper. What do you notice about its position relative to the center?

Success looks like:
* You correctly apply the translation, rotation (180° rule), and translation back steps for all four vertices.
* Your final rotated square has vertices P'(2, 2), Q'(0, 2), R'(0, 0), and S'(2, 0).
* You notice that rotating 180° around the center of the square means the square ends up in the exact same position.

Frequently asked about Rotations

Rotations spin a shape around a fixed point, called the center of rotation, by a specific angle. The shape's size and form don't change, only its position and orientation. You can describe any rotation using its center and the angle of turn. Read the full notes above for the details.

Rotations is a core topic in Transformation of the plane. Most exam papers test it via a mix of definitions, worked examples, and applied problems. The notes above cover the high-yield sub-topics, common pitfalls, and the kind of questions examiners typically set.

Yes — every note in the StudyAI Campus Hub is free to read in full, right here on this page, with no account needed. If you clone the plan into your own dashboard, the free plan shows a preview of each note there; Basic and above unlock the full notes in your dashboard, along with practice quizzes, flashcards and offline study. You can always come back here to read the complete note for free.
Continue with
Enlargements (Dilations)

More from Transformation of the plane


Get the full Transformation of the plane curriculum

Clone the complete plan to your dashboard for unlimited AI-generated notes, practice quizzes, and a personalised revision schedule.

Save this course free