Equations of Motion for Uniform Acceleration
From the Physics curriculum
TL;DR
When an object changes its speed at a constant rate, we call this uniform acceleration, and we can use a set of five special equations to describe its motion. These equations relate displacement, initial velocity, final velocity, acceleration, and time. Knowing any three of these quantities allows you to find the other two, making them super useful for solving many physics problems.
1. The Mental Model
Imagine driving your car and pressing the accelerator pedal just enough to steadily increase your speed without any jerks. This steady increase in speed is uniform acceleration. The equations of motion help us predict exactly where your car will be, how fast it'll be going, or how long it'll take, given a constant push.
2. The Core Material
Uniform acceleration means an object's velocity changes by the same amount every second. Think of it as a constant "rate of change of velocity." These equations are sometimes called "SUVAT" equations, named after the variables they use:
* s = displacement (how far an object has moved from its starting point, including direction)
* u = initial velocity (speed and direction at the start)
* v = final velocity (speed and direction at the end)
* a = acceleration (rate of change of velocity)
* t = time (duration of the motion)
It's super important that acceleration a must be constant for these equations to work. If acceleration changes, you can't use them directly!
The Five Equations

Photo by Jeswin Thomas on Pexels
Here are the five main equations. You don't need to memorize them if you understand how they relate to each other and practice using them.
-
v = u + at
This equation connects final velocity, initial velocity, acceleration, and time. It essentially says your final speed is your starting speed plus how much your speed changed due to acceleration over time. -
s = ut + (1/2)at^2
This equation helps find displacement based on initial velocity, acceleration, and time. It accounts for the distance covered due to initial speed and the extra distance covered due to speeding up (or slowing down). -
v^2 = u^2 + 2as
This one links final velocity, initial velocity, acceleration, and displacement. It's useful when you don't know (or don't care about) the timet. -
s = (u + v)/2 * t
This equation calculates displacement using the average velocity(u + v)/2multiplied by time. It's often very quick if you knowu,v, andt. -
s = vt - (1/2)at^2
This is less commonly taught as a "primary" equation but is derived from the others. It's useful if you knowv,a, andtbut notu. Think of it ass = ut + (1/2)at^2rewritten to solve forswhenuisn't given.
Choosing the Right Equation

Photo by cottonbro studio on Pexels
The trickiest part isn't the math, but choosing which equation to use. Each equation has four of the five SUVAT variables. The key is to identify what you know and what you need to find, and then pick the equation that doesn't include the variable you don't know and don't need.
Here's a visual guide to help you pick:
graph TD
start("Identify Knowns & Unknowns") --> A{What's missing<br/>from your info & you don't need?}
A --> B{Is 's' missing<br/>and not needed?}
B -- Yes --> Eq1["v = u + at"]
B -- No --> C{Is 'v' missing<br/>and not needed?}
C -- Yes --> Eq2["s = ut + (1/2)at^2"]
C -- No --> D{Is 't' missing<br/>and not needed?}
D -- Yes --> Eq3["v^2 = u^2 + 2as"]
D -- No --> E{Is 'a' missing<br/>and not needed?}
E -- Yes --> Eq4["s = (u + v)/2 * t"]
E -- No --> Eq5["s = vt - (1/2)at^2<br/>(If 'u' is missing)"]
Eq1 --> Done("Solve for Unknown")
Eq2 --> Done
Eq3 --> Done
Eq4 --> Done
Eq5 --> Done
Important Considerations:
- Units: Always use consistent units! If displacement is in meters (m), time in seconds (s), then velocity should be in meters per second (m/s) and acceleration in meters per second squared (m/s²). If you mix units (e.g., km/h and m/s), you'll get wrong answers.
- Vector Quantities:
s,u,v, andaare vector quantities, meaning they have both magnitude (size) and direction. You need to pick a positive direction and stick to it. For example, if "up" is positive, then "down" is negative. If acceleration is in the opposite direction of velocity, it's deceleration (negative acceleration).
3. Worked Example
Let's say a car starts from rest (meaning its initial velocity u is 0 m/s) and accelerates uniformly at 2.0 m/s² for 5.0 seconds.
Question:
a) What is its final velocity?
b) How far has it traveled in that time?
1. List what you know:
* u = 0 m/s (starts from rest)
* a = 2.0 m/s²
* t = 5.0 s
2. List what you need to find:
* v = ?
* s = ?
Solving Part a) - Find v:
We know u, a, t, and want v. The variable we don't know and don't need is s.
Looking at our equations, v = u + at fits perfectly as it doesn't involve s.
v = u + at
v = 0 m/s + (2.0 m/s² * 5.0 s)
v = 0 + 10.0 m/s
v = 10.0 m/s
So, the car's final velocity after 5 seconds is 10.0 m/s.
Solving Part b) - Find s:
We know u, a, t, and now v. We need s. There are a couple of equations we could use:
* s = ut + (1/2)at^2 (doesn't use v)
* s = (u + v)/2 * t (uses u, v, t)
Let's use s = ut + (1/2)at^2 since we already had all those values directly from the problem statement. This avoids carrying forward any potential errors from calculating v.
s = ut + (1/2)at^2
s = (0 m/s * 5.0 s) + (1/2 * 2.0 m/s² * (5.0 s)²)
s = 0 + (1/2 * 2.0 * 25)
s = 0 + (1 * 25)
s = 25 m
The car has traveled 25 meters in that time.
4. Key Takeaways
- Always identify your known variables (
s,u,v,a,t) and the unknown you need to find. - Pick the equation that excludes the variable you don't know and don't need to find.
- Ensure all your units are consistent before plugging numbers into equations.
- Remember that
s,u,v, andaare vectors; direction matters. Choose a positive direction and stick with it. - "Starts from rest" means
u = 0. "Comes to a stop" meansv = 0. - These equations only apply when acceleration is constant (uniform).
Common Mistakes to Avoid

Photo by Roman Koval on Pexels
- Mixing Units: Using kilometers per hour with meters per second squared will lead to incorrect answers. Convert everything to a consistent set (e.g., SI units: m, s, kg).
- Incorrectly Applying Signs: Forgetting that velocity and acceleration can be negative (indicating direction) is a common error. If something slows down, its acceleration might be negative if you chose the initial velocity direction as positive.
- Assuming Constant Acceleration: These equations are invalid if acceleration is changing.
- Using the Wrong Equation: Carefully verify that the equation you choose includes all your knowns and the one unknown you're looking for, and excludes the variable you don't have and don't need.
- Calculation Errors: Don't forget order of operations (e.g., squaring
tbefore multiplying bya).
5. Now Try It
A rocket accelerates upwards at 15 m/s² from rest for 10 seconds. Calculate:
a) Its velocity after 10 seconds.
b) The height it has reached after 10 seconds.
What success looks like: You should be able to list u, a, t, then use v = u + at for part (a) and s = ut + (1/2)at^2 for part (b), arriving at final answers with correct units.
Try it yourself: Velocity–time graph: acceleration and distance
Frequently asked about Equations of Motion for Uniform Acceleration
Study this next
Get the full Physics curriculum
Clone the complete plan to your dashboard for unlimited AI-generated notes, practice quizzes, and a personalised revision schedule.
Save this course free